Cisco WAP150 IEEE 802.11ac 1.20 Gbit/s Wireless Access Point
Click To Enlarge

Cisco WAP150 IEEE 802.11ac 1.20 Gbit/s Wireless Access Point

Price: $169.00
  • Item #: 882658823503
* Marked fields are required.
Qty: *


Standards: IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Ports: LAN Gigabit Ethernet auto-sensing

Cabling type: Category 5e or better

Antennas: Internal antennas optimized for installation on a wall or ceiling

LED indicators: 1 multifunction LED

Operating system: Linux

Physical Interfaces

Ports: 10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)

Buttons: Reset button, power on/off push button

Lock slot: Slot for Kensington lock


Physical Specifications

Physical dimensions (W x D x H): 5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm)

Weight: 0.77lb or 350g

Network Capabilities

VLAN support: Yes

Number of VLANs: 1 management VLAN plus 8 VLANs for SSIDs

802.1X supplicant: Yes

SSID-to-VLAN mapping: Yes

Auto-channel selection: Yes

Spanning tree: Yes

Load balancing: Yes

IPv6: Yes

  • IPv6 host support
  • IPv6 RADIUS, syslog, Network Time Protocol (NTP)

Layer 2: 802.1Q-based VLANS, 8 active VLANs plus 1 management VLAN


WPA, WPA2: Yes, including Enterprise authentication

Access control: Yes, management access control list (ACL) plus MAC ACL

Secure management: HTTPS

SSID broadcast: Yes

Rogue access point detection: Yes

Mounting and Physical Security

Multiple mounting options: Desktop or Wall

Physical security lock: Kensington lock slot

Quality of Service

QoS: Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS


Wireless throughput: Up to 1.2 Gbps data rate (real-world throughput will vary)

Recommended user support: Up to 64 connective users, 10 active users per radio

Multiple-Access Point Management

Single Point Setup: Yes

Number of access points per cluster: 4

Active clients per cluster: 120


Web user interface: Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)


Management protocols: Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management: Yes

Event logging: Local, remote syslog, email alerts

Network diagnostics: Logging and packet capture

Web firmware upgrade: Firmware upgradable through web browser, imported or exported configuration file

Dynamic Host Configuration Protocol (DHCP): DHCP client

IPv6 host: Yes

HTTP redirect: Yes

Reviews (0) Write a Review
No Reviews. Write a Review